360° optical cross-section measurement system for roll formed profiles and tubes

To guarantee consistently high quality tubes and profiles for your customers, products need to be measured regularly. COPRA® ProfileScan Desktop by data M is an accurate and particularly cost-effective solution for this task. Thanks to the patented 360° measuring method, the entire external view of the profile cross section can be captured in a single measurement.

360° measurement with a single sensor and a turntable
Optical measuring systems are usually equipped with a ring of multiple sensors around the profile. COPRA® ProfileScan Desktop is the first optical measuring device that can measure the entire visible surface of a profile cross section with only one sensor module and a turntable. The reduced number of sensors makes the system far more economical at almost the same accuracy. This setup also allows large inner areas to be measured even through small slots in the profile, considerably reducing “dead zones”.

Compact and portable design
The device is compact enough to be used on a desk and can easily be deployed at different production sites thanks to the included transport case. It connects to a laptop or desktop PC via USB and requires neither a separate controller nor an external power supply. Its robust sensor cabinet and user-friendly Windows interface make it easy to use in a production environment.

  • CPS 80: Single-sensor model for profiles up to 80 mm wide
  • CPS 200: Double-sensor model for profile cross sections up to 200 mm wide

Contactless and non-destructive measurement
Short profile samples can be measured right away without any rework. The contactless method also allows sensitive and easily deformable materials to be measured. Steel, aluminium, wood and plastic profiles are all scanned with the same parameters, so no exposure adjustment is needed.

Measuring principle
Optical scanners are mainly used in the quality control of profiles. Besides technical requirements, cost effectiveness plays a major role, and the advantage of optical over tactile measurement grows with the number of features to be measured. COPRA® ProfileScan works with the laser light-section principle. A laser in the sensor module projects a horizontal line onto the profile. A high dynamic range CMOS camera captures the reflected line, which the software converts into a 2D contour by triangulation. Using the turntable and reference marks, views from different angles are combined into a complete cross section. The software algorithms have been specifically tailored to roll formed profiles.

CAD comparison and reporting
The measured cross section can be compared with CAD data imported in DXF format to display deviations. All measurement results can be exported for further processing, e.g. in Microsoft Excel®.

Measuring functions

  • Angles: Line to line
  • Distances: Point to point, point to point parallel to a line, point to line, point to arc, arc to arc, line to line parallel to another line
  • Arcs: Radius and diameter
  • Tolerances: Tolerance definition and monitoring for every dimension

Easier setup of roll forming tools
During the assembly of roll sets, COPRA® ProfileScan allows the dimensional accuracy of the forming at each station to be checked. This significantly shortens the start-up of the line. The forming performance of the roll set can also be reassessed regularly.

Reverse engineering and COPRA® RF integration
CAD integration and portability make COPRA® ProfileScan the ideal solution for reverse engineering projects. Fully integrated with COPRA® RF, the system transfers measurement data as a point cloud that can be edited directly in the design environment.

Specifications

CPS 80 CPS 200
Measuring principle Light section (laser triangulation) Light section (laser triangulation)
Max. profile length¹ 310 mm 760 mm
Max. profile diameter² 70–80 mm 175–200 mm
Min. profile width 15 mm 15 mm
Repeatability (rel. to measuring field) ±0.013% ±0.018%
Accuracy (rel. to measuring field) ±0.03% ±0.04%
Number of sensors 1 2
Device dimensions 340 × 465 × 310 mm 550 × 570 × 575 mm
Case dimensions (L×W×H) 430 × 495 × 185 mm 630 × 660 × 280 mm

¹ Other dimensions on request. ² Depending on profile cross section.

blechnet Award, Blechexpo 2013 · US Patent: US 9,127,936 B2

This site uses cookies. If you continue to use the site, you agree to the use of cookies. Click for more information.