Site Map Turkish

The 18th International Conference on Machine Design and Production, focuses on advanced manufacturing processes, machines and materials, will be held in Eskisehir/Turkey.

Michel Pereme from Simufact Engineering GmbH, the developer of the Simufact Additive program, will make a presentation titled as "Practice-oriented Metal Addi...


The new version of Simufact Forming, namely v15, is now available. Simufact Forming v15 offers major improvements as follows:

  • Design and optimize inductive heating processes
  • Simulate case hardening in Simufact Forming 15
  • Improved contact positioning capabilities by redesigned positioner
  • Make simulat...

  • New version of DYNAFORM, namely 5.9.4, which is sheet forming simulation program, is now available. DYNAFORM 5.9.4 offers major improvements as follows:

  • 2 D (axi-symmetric) analysis
  • Spinning & flow forming analysis
  • Description of the rotation motion of the tool
  • Springback compensation in more than ...

  • Çelikform Gestamp Automotive Co. chose COPRA® RF for using in Roll Form process design and simulations.

    The training has been completed in the past week and the software has started to be used in the company....


    Simufact Engineering GmbH, developer of metal forming and manufacturing simulation software Simufact Forming, NETFORM Engineering and our partner company BIAS Engineering will participate in the 4th International Exhibition for Fastener and Fixing Technology at the Istanbul Expo Center on 1-2-3 March 2018.

    We would be happy to...


    The new version of the Simufact Additive, namely v3.1, is now available. Some of the new features in this version are:

  • Determine optimum piece position automatically
  • Automatic geometry optimization for minimum dimensional deviation
  • Ability to create materialise based support element
  • Detection manufactur...

  • Simufact honoured NETFORM with the "Best Business Partner Award" for the activies performed in 2017....


    New version of Simufact Additive is released. Some of the main developments in this new version is as follows:

  • Thermo-mechanical calculation method
  • Simultaneous simulation of several components in the build space
  • Base plate distortion and stress calculations
  • Best-Fit method for result comparison with re...

  • Sheet metal tool and part producer Coskunoz is now using DYNAFORM for sheet metal forming analysis and springback calculations.

    You can find detailed information about DYNAFORM by clicking on the following link or under product page.

    Click here for detai...


    1. International University Univeristy-Industry Cooperation Congress organized by Manisa CBU USITEM will take place on December 18th-19th.

    In this congress NETFORM will give a presentation about Utilization of Numerical Simulation in Additive Manufacturing".

    You can reach the congress program and registration informat...


    Uludag University is now using DYNAFORM for academic R&D studies of sheet metal forming processes.

    Click here for detailed information about DYNAFORM

    ...

    "Additive Manufacturing Day" which is organized by Form Machinery and Atilim University will take place in Incek/Ankara on October 27th, 2017. For detailed conference program please click here.

    Michel Pereme...


    Seminar titled as "CAE Applications at Manufactruring Industry" has been held at Munzur University (Tunceli-Turkey) by Netform Engineering.

    ...


    BIAS User Conference 2017 will be held on October 5th & 6th, 2017 at The Green Park Pendik Istanbul Hotel.

    In this event three sessions chaired by NETFORM will be dedicated to manufacturing applications. For detailed conference program


    New version of Simufact Welding is released. Some of the main developments in this new version is as follows:

  • Faster calculation of thin-walled sheet metal parts by solid-shell elements
  • Fast calculation method for resistance spot welding processes
  • Automatic detection of edges with node sequences for faster ...

  • NETFORM is now taking place in the advisory board of Celal Bayar University, Univeristy-Industry Cooperation Technology Research Center (USITEM) to contribute in the research studies carried out in cooperation with industrial companies.

    Click here for USITEM's web page <...


    The smart profile contour measuring and quality control device COPRA® ProfileScan Desktop will be served with 30% discount till end of July 2017, for those who are using COPRA® RF software currently or will have ordered in this time period.

    c...


    Simufact.additive is the new member of the product family of Simufact which developed for simulating additive manufacturing (3D printing) processes.

    It is possible to calculate distortions and residual stresses on the part after manufacturing, removal of support structures and heat treatment such as stress relieving or hot isostati...


    NETFORM and BİAS will organize a seminar with title "CAE Applications in Manufacturing Industry" in cooperation with Kocaeli University Mechanical Engineering Society.

    In this seminar utilization of computer simulations in metal forming, welding, mechanical joining, additive manufacturing, fluid/crash/fatigue analysis and bio...


    We exhibited with "dataM Sheet Metal Solutions" , that is the leading company providing software and devices in roll form and sheet metal forming, at Istanbul Rulo 2017 fair between 23-25 March 2017.

    To our visitors, we shared information about COPRA® software, design and simulatio...


    on 21 /03/2017 Netform organized "Roll Forming Technology Seminar" at "The Green Park Pendik Otel / Istanbul" with the participation of dataM Sheet Metal Solutions GmbH, which is the vendor of COPRA® software and devices.

    During the seminar, more than 50 participants have been informed about new features about COPRA® softwa...


    Sheet metal tool and part producer Coskunoz is now using simufact.welding in the design process of arc and laser welding applications.

    You can find detailed information about simufact.welding by clicking on the following link or under product page.


    Sheet metal tool and part producer Coskunoz is now using simufact.forming in the design process of mechanical joining and pressure welding applications.

    You can find detailed information about simufact.forming by clicking on the following link or under product page.


    Bursa Teknik University is now using DYNAFORM for academic R&D studies of sheet metal forming processes.

    Click here for detailed information about DYNAFORM

    ...

    New version of metal forming and manufacturing simulation program simufact.forming v14 is released. In this new version several new features and a new graphic engine is implemented into GUI of the program which speeds of pre- and postprocessing.

    Addition to the GUI improvement various bug fixes and imrpovements are made in the sol...


    The new version of DYNAFORM, namely v5.9.3, which is a complete sheet metal forming process and die system simulation solution, is now available.

    DYNAFORM 5.9.3 offers major improvements in blank/trim line development including combining the interface for blank development and trim line development, Auto SCP feature which is used ...


    New version of simufact.welding, v6 is released. Some of the main developments in this new version is as follows:

  • New "single shot" and "shrinkage" calculation methods addition to the existing "transient" method to be able to perform faster analysis of big structures with long weld seams
  • New "brazing" module
  • New "stres...

  • Suspension spare part producer Teknorot is now using simufact.forming in the design process of hot forging, reducer rolling and assembly tools.

    You can find detailed information about simufact.forming by clicking on the following link or under product page.


    Suspension spare part producer AYD is now using VeraCAD for precise and fast design of reducer rolling process and rollers for both steel and aluminum parts.

    Detailed information about VeraCAD can be accessed by clicking on the following link.

    Click here ...


    NETFORM participated in the ”Advances in Hot Forging Technologies” conference which is organized by Uddeholm and InductoTherm. Prediction of hot forging defects by using numerical simulations and analysis of forging dies are presented with industrial case studies.

    ...


    New version of TransMagic, which provides premier access to open, view, repair, compare and write 3D CAD data, is now available. Detailed information about the new features can be found on the following link.

    TransMagic ...


    Within the corporation with Bursa Technical University, numerical simulations of mechanical joining operations, namely rivetting and clinching will be carried out by using simufact.forming.

    ...


    New version of welding process simulation software simufact.welding is now available. In this new version v5.0 a new module is introduced which is dedicated to resistance spot welding processes. In addition to that it is now possible to model a subsequent tensile test analysis after welding simulation within the same analysis.

    De...


    New version of reducer rolling process and design software VeraCAD is released.

    Detailed information about the program can be found on the following links.

    VeraCAD product page


    Hitit Üniversitesi, started to use simufact.forming for the manufacturing process analysis within the under graduate and graduate courses and R&D projects.

    ...


    NETFORM Engineering has accomplished the production of the first cold forged aluminum part in Turkey. Cold forged aluminum parts have been previously produced abroad and thanks to our domestic production skills NETFORM can offer cost effective solutions with shorter a delivery time.

    You can send your forged part inquiries to us by ...


    Hot forged steel component manufacturer Parsan is now using VeraCAD for precise and fast design of reducer rolling process and rollers.

    You can find detailed information about VeraCAD by clicking on the following link or under product page.

    Click here f...


    Suspension spare part producer Teknorot is now using VeraCAD for precise and fast design of reducer rolling process and rollers.

    You can find detailed information about VeraCAD by clicking on the following link or under product page.

    Click here for detail...


    NETFORM will exhibit at the first time orginized fair Rulo 2015 (International Coil and Sheet Metal Manufacuring and Working Fair) together with company dataM, that provides solutions and software for roll forming. Our booth and visiting dates:

    İstanbul Expo...


    MSC Software announced the acquisition of Simufact Engineering. Simufact is an industry leader in simulation of metal forming and joining processes. Based on best-in-class nonlinear simulation software technology, Simufact.forming and Simufact.welding are metal forming and welding process simulation tools used by aerospace, automotive, and mach...


    The new version of DYNAFORM, namely v5.9.2.1, which is a complete sheet metal forming process and die system simulation solution, is now available.

    Several new features, i.e. hot stamping, tube bending, blank and trim line optimization as well as improvements are available in this new release.

    Detailed information about...


    TransMagic software provides premier access to open, view, compare and write 3D CAD data. The unique interface and functionality address a wide range of complex CAD data-exchange and comparison requirements across multiple engineering applications. A sophisticated toolset enables you to quickly and accurately analyze and repair geometry to gene...


    "Numerical Image Processing and Application" seminer will by organized by NETFORM Engineering on 22nd of December 2014 between 13:00-15:00 at Celal Bayar University, Engineering Faculty. Invited speaker Mr. Devrim Onder will give information about image processing applications in manufacturing, quality control, material science, as well as cons...


    Nowadays servo presses are replacing eccentric, knuckle joint and link drive presses in metal forming operation at many sectors, because of high ability and easily forming of complex parts, etc. Major obstacles to the spread of servo presses are; high investment costs, low press speeds and limited press force.

    Power of BIAS Multi Ser...


    JMatPro is a powerful software which calculates a wide range of materials properties and is particularly aimed at multicomponent alloys used in industrial practice.Using JMatPro you can make calculations for:

  • Stable and metastable phase equilibrium
  • Solidification behaviour and properties
  • Mechanical properties
  • ...

  • Simufact Engineering, software provider for industrial forming and manufacturing processes is newly presenting the 'Simufact Scientific Publication Award'. With this award Simufact is honoring particularly practice-relevant scientific publications of research and development projects, in which Simufact software was used. The award, endowed with...


    As a part of the "Tuesday Meetings" organized by UCTEA (Union of Chambers of Turkish Engineers and Architects) Chamber of Mechanical Enginners Izmir Office, NETFORM Engineering will give a training about the "Utilization of Numerical Calculation Techniques (Computer Simulations) in Sheet Metal Forming Applications".

    In this training, ...


    47th International Cold Forging Group (ICFG) Conference is going to take place in Ankara between September 21-24, 2014.

    NETFORM Engineering will take place in this event with metal forming simulation software developer, Simufact Engineering and we invite you to our booth at the exhibition area.


    Yildiz Technical University chose DYNAFORM for the R&D studies in production of sheet metal components.

    ...

    Romak Machinery chose DYNAFORM for process design and R&D studies in production of sheet metal automotive parts.

    ...

    The new version of DYNAFORM, namely v5.9.2, which is a complete sheet metal forming process and die system simulation solution, is now available.

    Several new features, i.e. hot stamping, tube bending, blank and trim line optimization as well as improvements are available in this new release.

    Detailed information about t...


    NETFORM Engineering, is also a solution partner on dental stress analyses.

    The article, whose Finite Element Analyses were performed by NETFORM Engineering, titled as "Effect of Various Techniques on Mechanical Strength of Computer Controlled Zirconia Framework Designs" can be read via


    New version of Simufact.welding v4.0 is released.

    "What is new in simufact.welding v4.0" document can be downloaded by clicking here.

    For further information about the program please


    ETCOMA Engineering, located in Bursa / Turkey, started to use COPRA® RF in roll form process design....

    International Conference and Exhibition on Welding Technologies was held between 21-23 May 2014 in Manisa, Turkey. Welding simulation software: simufact.welding participated in the event....


    In connection with "Computer Aided Engineering in Manufacturing Conference" at Celal Bayar University on April 29th 2014, opening ceremony of the Virtual Manufacturing Laboratory, which is established in the Metallurgy Engineering Department, took place.

    ...


    The seminar will be held on 29.04.2014 between 13:00-17:00; at Engineering Faculty of Celal Bayar University, Muradiye, Manisa. Speakers from academia and industry will present examples of CAE applications.


    Within the seminar, the opening ceremony of "Virtual Manufacturing Laboratory", which has been established in the Metallurgical E...


    The market leading roll form design and analysis software COPRA RF has now Turkish interface with its recent release, 2013 SR1

    ...

    Blank Size Engineering (BSE) module of DYNAFORM is now available as a stand-alone module for NX environment, called BSE-in-NX.

    The solution is a complete toolset for accurately predicting flat blank profiles, optimal nesting layouts and forming feasibility for 3D part models. It is now available for users of Siemens’ NX digital pr...


    New version v12 of Simufact.forming, metal forming simulation program is released. You can download the product presentation and the information about the new features comes with v12 under the software section.

    For demo license requests please send an e-mail to info@netformmetal.com

    ...

    For a case study of EAE Machinery achieved by COPRA® FEA RF, please click here...

    In January 2014 issue of the professional magazine 'ST Makina' our article has been published stating the benefits of use of simulation technology in welding process.



    For article please click here...


    Celal Bayar University - Turgutlu Vocational School chose DYNAFORM for the R&D studies in production of sheet metal components.

    ...

    The seminar will be held on 28.11.2013 between 13:00-17:00; at Mechanical Engineering Faculty of Istanbul Technical University, Gumussuyu, Istanbul. Speakers from simufact GmbH; academia and industry present examples of CAE applications.



    At the end of the seminar, the opening ceremony of "Virtual Manufacturing Laboratory", that ha...


    Ermetal chose DYNAFORM for process design and R&D studies in production of sheet metal automotive parts.

    ...

    NETFORM Engineering has moved to its new address below:
    Address: 288/5 Sok. No:10 D:14 Colakoglu Center 35535 Bayrakli, Izmir - Turkey

    ...

    Prototype production of the "Adjustable Forming Tool", which has been developed by NETFORM Engineering, is completed.

    Developed tool system can be utilized in net shape forming, wire drawing and powder metallurgy (PM) processes.

    For detailed information please click here<...


    The company "Eko Endustri", which is located in Kemalpasa-Izmir/Turkey, has started to use simufact.forming, in their cold forging process design and virtual forging tirals....

    Selçuk University chose DYNAFORM for R&D studies about sheet metal forming and hydro forming....

    The new roll form process design and simulation software versions COPRA® RF 2013 and COPRA® FEA RF 2013 have been released. Key developments of these versions:

    COPRA® RF 2013
    - Different sheet thicknesses considered in one tube project
    - Intelligent COPRA®– Inventor®– Interface
    - Autamatic update servic...


    Dates of the engineering and simulation software trainings related bulk forming, sheet forming and roll forming are announced for 2013.

    These trainings are given only in Turkish at the moment. For further information please contact us.

    ...

    New version v11.0.2 of Simufact.forming, metal forming simulation program is released. You can download the product presentation and the information about the new features comes with v11.0.2 under the software section.

    For demo license requests please send an e-mail to info@netformmetal.com

    ...

    NETFORM Engineering Machinery Metal was awarded the second place in the "Izmir Innovation Prizes 2013", which is organized by "Izmir Young Businessman Association (IGID)" and supported by "Ministry of Science, Industry and Technology" and "SME Development Association (KOSGEB)", for the project "Machine Vision Integrated Adjustable Metal Forming ...


    The company 'All-Pro Fasteners' , located in Texas/U.S.A. ; has started to use "NetTool" software, in their cold forming tooling design....

    Information about Simufact.welding, which is a welding simulation program developed by Simufact, is added under the software section.

    For demo license requests please send an e-mail to info@netformmetal.com

    ...

    New version v11.0.1 of Simufact.forming, metal forming simulation program is released. You can download the product presentation and the information about the new features comes with v11.0.1 under the software section.

    For demo license requests please send an e-mail to info@netformmetal.com

    ...

    The new version of DYNAFORM, namely v5.9, which is a complete sheet metal forming process and die system simulation solution, is now available.

    This latest release promises to deliver a robust environment for engineers to simulate and analyze the entire proses chain and tool system.

    Detailed information about the new re...


    A seminar titled "Simulation Applications in Manufacturing Industry and Industry-Academia Cooperations" was held at Celal Bayar University, Muradiye Campus on 12 Dec 2012 btw. 13:00-15:00.

    For detailed information:


    Simufact Engineering, a global software and service company for manufacturing process simulation and Schuler SMG, a manufacturer of hydraulic-press systems and forming machines have formed a technology alliance.

    The main purpose of the partnership is the adaption of Simufact's simulation programs to Schuler's hydraulic-press systems....


    Cold and Hot Forging Training organized by NETFORM Engineering was realized on September 27th & 28th 2012 in Istanbul with participants dealing with forging in different sectors.

    For further information about our trainings please visit the "Trainings" section on our webpage.

    ...

    NETFORM Engineering and dataM Sheet Metal Solutions GmbH, the vendor of world famous COPRA® RF roll form design sotware, have organised a seminar titled " Roll Forming: Developments and Design Methods", on 11.10.2012 in İstanbul Sheraton Maslak Hotel / İstanbul.

    Participation is free but pre-registration is necessary.

    F...


    Agile Software Development Training
    • The Agile Manifesto
    • Agile Principles
    • Extreme Programming (XP) Overview
    • Agile Planning
    • Testing
    • Agile Software Design 
    • Object ...


    An article about the use of LED technology in automotive industry has been published in May/June 2012 issue of the magazine "Automotive Design".

    LED technology, thanks to its high efficiency, provides advantage on long-term cost carbon emmission and power consumption. However, LED head-lights, whose volume is low and where the air fl...


    Dates of the engineering and simulation software trainings related bulk forming, sheet forming and roll forming are announced for 2012. These trainings are given only in Turkish at the moment.

    For further information please contact us.

    ...

    Forging tool design & manufacturing company "Ability Engineering Pvt. Ltd", located in India, has decided to use NetTool shrink-fit tool analysis and optimization software....

    A new version of "NETFORM - Metal Forming Force Calculator" that is able to calculate forming forces for fundemental metal forming processes, has been released. The torque calculation option for profile rolling process has been added into software.

    In order to get the new release, please visit Programs pa...


    NETFORM Engineering became an official reseller of VeraCAD in Turkey, which is a reducer rolling design software developed by Eratz Engineering.

    You can reach detailed information about VeraCAD on the following link or through the software section.

    Click here to access VeraCAD...


    The new version of DYNAFORM, namely v5.8.1, which is a complete sheet metal forming process and die system simulation solution, is now available.

    This latest release promises to deliver a robust environment for engineers to simulate and analyze the entire proses chain and tool system.

    Detailed information about the new re...


    A seminar will be held on 11-12 January 2012, in Istanbul, which will be given by an expert from company dataM/Germany about rollform process design and utilization of COPRA® . The second day is dedicated to a training on Tubes and Shaped Tubes.

    For the brochure in Tu...


    As a part of the "Tuesday Meetings" organized by UCTEA (Union of Chambers of Turkish Engineers and Architects) Chamber of Mechanical Enginners Izmir Office, NETFORM Engineering will give a training about the "Utilization of Numerical Calculation Techniques (Computer Simulations) in Metal Forming Applications".

    In this training, genera...


    NETFORM Engineering participated in AluExpo2011, which was held between 13-16th of October in Istanbul.

    The interest was on the aluminum forming technology which is an economic and innovative alternative to die casting or machining.

    Most of our visitors dealt with LED heat sinks whose heat conduction capacity are nearly d...


    From now on, PDS Makina makes pipe, open profile and shaped profile roll form process designs by utilizing COPRA®. Training is held at PDS facilities between 09-12.08.2011...

    AYD Chassis, which is a leader forging company located in Konya, has selected simufact.forming for forging process/tooling design and R&D studies....

    New version v10.0 of Simufact.forming, metal forming simulation program is released. You can download the product presentation and the information about the new features comes with v10.0 from the links below.

    For demo license requests please send an e-mail to info@netformmetal.com

    ...

    NETFORM has release two metal forming software that can be utilized in metal forming process and die shrink-fit design.

    With 'NETFORM Metal Forming Force Calculator' users are able to calculate the forming forces for fundemental metal forming processes.

    'NETFORM Shrink Fit Analysis Software' is able to perform stress analy...


    SOM Fasteners chose Simufact finite element software for analyzing the forming sequence and die designs as well as increasing the product quality....

    A two days long seminar titled "Metal Forming" has been held in Ankara on 4-5 September 2010 to employees and acedemia of SOM A.Ş and Atılım University Metal Forming Center of Excellence....

    The International Simufact Roundtable 2010 that meets Simufact users from academia and industry has been held between 27-30th of September in Bamberg/Germany.

    Simufact introduced the newcoming version of its leading manufacturing simulation software. In the new version,a batch of improvements will be implemented, such as enlarged mat...


    We became the authorized reseller of the metal forming simulation programs Simufact, COPRA and Dyna-form which are widely used in bulk and sheet metal forming industries. Please click here to get detailed information about the programs....

    Our R&D project application with the title "Development and production of numerical image processing system integrated adjustable metal forming tool" was accepted by KOSGEB (Small and Medium Enterprises Development Organization).

    Within this project, an adjustable tool will be developed for forging and wire/bar drawing applications w...


    Our company was officially established on 12/04/2010. Our office is located in the Ege University Campus. Please click here for the detailed contact information and map....

    NETFORM Engineering Machinery Metal Ltd. All Rights Reserved. © 2018    Terms of Use    Privacy   Design